Vestil LLW-PAILD Series, Руководство по эксплуатации и обслуживанию

Страница: 1 / 9

Table of Contents Rev. 6/21/2019 LLW-PAILD, MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 1 of 9
LLW-PAILD Series Pail Dumpers
Use and Maintenance Manual
LLW-PAILD-100 LLW-PAILD-200
Receiving instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of
lading. If the product is undamaged, discard the packaging.
Replacement Parts and Technical Service
For answers to questions not addressed in these instructions and to order replacement parts, labels, and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be
contacted online at http://www.vestilmfg.com/parts_info.htm .
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply with
laws, regulations, codes, and mandatory standards applied where the product is used.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Web: www.vestilmfg.com e-mail: info@vestil.com
Table of Contents
Specifications (dimensions, capacity, net weight): LLW-PAILD-100 …………………………………………..……….…... 2
Specifications (dimensions, capacity, net weight): LLW-PAILD-200 ………………………………………………….…..… 2
Signal Words ….…………………………………………………………………………………………………………..…….… 3
Hazards …………………..…………..………………………………………………………………..…………………..…….… 3
Exploded View & Bill of Materials: LLW-PAILD-100 …..……………….…….…………………………………....……....... 4
Exploded View & Bill of Materials: LLW-PAILD-200 ..……..……….…………….…………………………….......……..… 5
Using the Hand Truck …....…………………………………………………………………………………………… ...……. 6 - 7
Record of Satisfactory Condition ……………………………………………………………………………………………….. 7
Inspections & Maintenance ………………………………………………………………………………………………....... 7 - 8
Labeling Diagram …………………………………………………………………………………………………………..……... 8
Limited Warranty …...………………………………………………………………………………………………………..……. 9