Vestil LAD-PW-18-10-G, Инструкция по эксплуатации

Страница: 20 / 23

Table of Contents Rev. 10.24.2019 LAD-PW, MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 20 of 23
RECORD OF SATISFACTORY CONDITION (THE “RECORD”)
After assembling the ladder and before putting it into service, visually inspect the ladder. Record the condition and
appearance of each of the frame members (step weldment, back leg weldment, base support frame members), the
handrails, outriggers, wheels and/or casters, (leg) caps, back platform frame and chain, and all fasteners (bolts, nuts,
etc.). Thoroughly photograph the ladder from multiple angles. Include close range photographs of the rubber leg caps,
casters and wheels, all labeling, and all handrail connections. Add the photographs to the record. Collate all
photographs and writings into a single file. This file is a record of the ladder in satisfactory condition. Compare the
results of all inspections to this Record to determine whether the ladder is in satisfactory condition. Do not use the
ladder unless it is in satisfactory condition. Purely cosmetic changes, like damaged paint or powdercoat, are not
changes from satisfactory condition. However, touchup paint should be applied as soon as damage occurs.
NATIONAL STANDARDS
This product is a “mobile ladder stand” (MLS). ANSI standard A14.7 (the “Standard”) applies to MLS’s. You should
acquire a copy of the latest version of the standard. Follow all use and maintenance/care instructions provided in the
Standard as well as all other provisions for MLS owners and users. If any content in this manual conflicts with any
mandatory provision(s) in the Standard, apply the provision(s) from the Standard.
USING THE LADDER
Review all warnings in HAZARDS OF USING THE LADDER on p. 3 before using the ladder.
Inspect the ladder before each use for damage, such as unusual wear, deterioration, or corrosion. Tighten loose
nuts or replace nuts that cannot be adequately tightened.
Step 6: Install the platform railing bar (44-514-324; 44-514-314; or 44-514-343). Attach the bar to the
mounting tabs with bolts (11107), lock washers (33622), and flat washer (33008).
Models with 12 steps (LAD-PW-26-12 & LAD-PW-32-12) also include a chain midrail (99-145-031 or
99-145-025) with a snap hook on each end. Attach the snap hooks to the hook loops.
Hook
loop
Snap
hook
Chain midrail with
snap hooks
Platform railing bar
A
A
Flat washer
33008
Lock
washer
33622
Bolt
11107
Mounting
tab