HT-02-1616A INSTRUCTION MANUAL
BASIC DATA:
MODEL CAPACITY
LOWERED
HEIGHT
RAISED
HEIGHT
TABLE
DIMENSIONS
NET
WEIGHT
HT-02-1616A
200LBS.
31”
49”
16” X 16”
62 LBS.
ASSEMBLY INSTRUCTIONS:
1.
Put the frame with casters on the ground.
2.
Install hydraulic cylinder on the frame, and secure it with big washer
(#24), spring washer (#25) and M12 bolt (#26).
3.
Remove solid plug on top end of the cylinder and replace it with
bleeder (vent) plug
to allow air to be bled from the hydraulic system
.
4.
Join the Cylinder joint block (#6) to the lift piston (#(7), and secure
them by nut (# 7).
5.
Use spanner to tighten nut (#7) under the table.
6.
Install push/pull handle (#1) on front side of the table (#5), and secure
it by M8 bolt (#4), spring washer (#3) and flat washer (#2).
7.
Now tighten all bolts & nuts.
8.
Check all the parts, and then test this lift table with weight and
without weight.
