Vestil FPU-TN Series, Инструкция по эксплуатации

Страница: 1 / 4

Table of Contents Rev. 1/22/2019 FPU MANUAL
Table of Contents Copyright 2018 Vestil Manufacturing Corp. Page 1 of 4
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of
it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Replacement Parts and Technical Service:
To order replacement parts, labels, and accessories, contact the technical service and parts
department online at http://www.vestilmfg.com/parts_info.htm . Alternatively, you may request
replacement parts and/or service by calling (260) 665-7586 and asking for the Service Department.
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Web: www.vestilmfg.com e-mail: info@vestil.com
Table of Contents
Signal Words ……………………………………………….………………………………………………………… 2
Hazards …………………..……………………………………………………..………………………….………… 2
Exploded View and Bill of Materials ………..…………………………………………………………….............. 3
Using the Fork Protectors ………………………………………..…………….................................................. 3
Record of Original Condition ……………………………………………………………………………………….. 3
Inspections& Maintenance …………………………………………………………………………………………. 3
Limited Warranty …………………………………………….……………………………………………………..... 4
FORK TIP PROTECTORS
FPU-TN-XX and FPU-TK-XX
INSTRUCTION MANUAL