Vestil EHLT Series, Инструкция по эксплуатации

Страница: 2 / 24

Operator’s Manual 2/2/21 EHLT, MANUAL.DOCX
Table of Contents Copyright 2020, Vestil Manufacturing Corp. Page 2 of 24
Table of Contents
Signal words
… … … … … … … … … … … … 2
Hazards … … … … … … … … … … … … 2
Model number and capacity … … … … … … … … … … 3
Exploded part views and Bills of Material … … … … … … … … 4
Electrical and hydraulic system diagrams … … … … … … … … 9
Installation instructions … … … … … … … … … … 14
Record of satisfactory condition … … … … … … … … … 17
Operation instructions … … … … … … … … … … … 17
Inspection and maintenance … … … … … … … … … … 19
Troubleshooting … … … … … … … … … … … 22
Labeling diagram … … … … … … … … … … … 23
Limited warranty … … … … … … … … … … … 24
SIGNAL WORDS
This manual uses SIGNAL WORDS to direct the reader’s attention to important safety-related messages. These
messages describe uses of the product that could result in personal injury or property damage. Each signal word
corresponds to a specific hazard level. The following are definitions of signal words that might appear in this manual.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS INJURY.
Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the product.
HAZARDS
Vestil Manufacturing strives to identify all foreseeable hazards associated with the use of its products. However,
material handling is dangerous and no manual can address every risk. The end user is ultimately responsible for
exercising sound judgment at all times in the use of this product.
Improper or careless operation of this device might result in serious personal injuries.

Read and understand this entire manual before installing, assembling, using or servicing this lift table. Keep
this manual in a location known to persons who use the lift table. Read the manual whenever necessary to
refresh your understanding of proper use, inspection, and maintenance procedures.
Failure to read and
understand this owner’s manual before using or servicing the lift table constitutes a misuse of the product .

The Electric Hydraulic Scissors Lift Table presents pinch point and hydraulic pressure hazards to the user and
bystanders. ALWAYS follow these instructions to avoid injury.

The lift table is intended for use on a level concrete surface. DO NOT use a lift table that has not been anchored
to a level concrete surface. See installation instructions starting on page
14 .