Vestil E-TUG, Инструкция по эксплуатации

Страница: 1 / 7

Table of Contents Rev. 2/8/2019 E-TUG MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 1 of 7
E-TUG Electric Load Transporters
Instruction Manual
Receiving Instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of
lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply with
laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Assistance & Replacement Parts:
For answers to questions not addressed in these instructions and to order replacement parts, labels, and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be
contacted online at http://www.vestilmfg.com/parts_info.htm .
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
Website: www.vestilmfg.com e-mail: info@vestil.com
Table of Contents
Specifications …..…………...………………………………………………………………………….......................................................... 2
Signal Words …………………………………………………………………………………………………………………………………….. 2
Hazards of Improper Use .……………………………….……..………..……………………………………………………………………… 2
Controls, Switches, and Gauges ………………………………………………………………………………………………………………. 3
Battery Charge Gauge ………………………………………………………………………………………………………………………. 3
Belly Switch …………………………………………………………………………………………………………………………………… 3
Movement Controllers ……………………………………………………………………………………………………………………….. 3
Emergency Stop Switch (E-stop) …………………………………………………………………………………………………………… 3
Operation …………………………………………………………………………………………………………………………………………. 4
Charging the Batteries …………………………………………………………………………………………………………………………… 4
Record of Normal Condition …………………………………………………………………………………………………………………….. 5
Inspections & Maintenance ……………………………………………………………………………………………………………………... 5
Troubleshooting ………………………………………………………………………………………………………………………………….. 5
Labeling Diagram ………………………………………………………………………………………………………………………………… 6
Limited Warranty …………………………………………………………………………………………………………………………………. 7