Rev. 6/25/2019
CYL-HLT MANUAL
Copyright 2019 Vestil Manufacturing Corp. 6 of 7
RECORD OF SATISFACTORY CONDITION (THE “RECORD”)
Record the condition of the lifter before putting it into service. Thoroughly photograph the unit from multiple
angles so that all fasteners and operating mechanisms are clearly visible. Take close range photographs of the
labeling applied to the truck. Raise and lower a cylinder. Describe the operation of the winch. Describe sounds
heard as the cylinder rises and descends. Include detailed descriptions of the frame, rollers, casters, carriage,
mast rollers, and the lifting mechanisms (winch, cable, and sheaves). How much effort is required to turn the
winch? Apply the caster brakes. Photograph the brakes. Try to move the truck with the brakes applied and
describe how well the brakes resist movement. Collate all photographs and writings into a single file. Give the file
a name that clearly identifies it. This file is a record of the unit in satisfactory condition. Compare the findings of all
inspections to the record to determine whether the truck is in satisfactory condition. Purely cosmetic changes, like
damaged paint/powder coat are not changes from satisfactory condition. However, touch-up paint to be applied to
all affected areas as soon as damage occurs.
INSPECTIONS & MAINTENANCE
Regular inspections and maintenance are necessary to keep the device in normal condition. Compare the
results of each inspection to the
to determine whether the unit is satisfactory condition or requires repairs
or replacement parts. If you are uncertain whether a part requires repair or replacement, contact
to discuss your concerns.
•
Periodically lubricate moving parts.
•
Keep the product clean and dry.
•
Only use manufacturer-approved replacement parts.
Inspect the lifter at least once per month to confirm satisfactory condition. Do not return the lifter to service
unless/until it is in satisfactory condition.
1) Examine the frame for cracked welds, metal fatigue, rust, and corrosion that affects the structural integrity of
the lifter. The structure should be clean, square and rigid, and free of rust and corrosion. Remove dirt and
debris.
2) Inspect the winch and cable. Sheaves should turn smoothly as the cable passes over them. The cable should
be free of elongations, bird-caging, thinning, broken/cut strands, and rust and corrosion. The winch should turn
smoothly in both directions. It should be solidly fastened to the frame of the lifter.
3) Check the ratchet mechanism and ratchet strap. Release/extend the strap. See
handle back-and-forth to retract/tighten the strap. You should not be able to pull strap from the spindle unless
the ratchet has been released. The strap must not be cut, substantially worn, fraying, etc.
4) Inspect the casters. Move the lifter a short distance to confirm that each caster rolls smoothly and is securely
fastened to the lifter. The wheel material should not be cracked, severely or unevenly worn, or damaged in
other ways that affect its ability to support weight or roll easily.
5) Labels: confirm that all labels are present, undamaged and readable. See
LABELING DIAGRAM
The unit should be labeled as shown in the diagram.
However, label content and location are subject to change
so your product might not be labeled exactly as shown.
Thoroughly photograph the unit when you first receive it as
discussed in the
Record of Satisfactory Condition
this manual. Make sure that your Record includes a
photograph of each label. Modify this diagram, if necessary,
to indicate labeling actually applied. Replace all labels that
are, damaged, missing, or not easily readable (e.g. faded).
Contact the
online at
http://www.vestilmfg.com/parts_info.htm
to order
replacement labels
. You may also call (260) 665-7586 and
ask the operator to connect you to the
A: Label 728
B
A
B: Label 287
