CAUTION
KEEP watching the condition of load. Stop operating lifter if load become unstable.
9.CHARGING THE BATTERY
(1) Check the quantity of Battery fluid. If it is insufficient, add the battery solution according to battery
operation manual.
(2) Disconnect the battery socket.
(3) Connect the charging port of battery socket to the battery charger.
10.REGULAR INSPECTION
Perform the regular inspection for the safety operation.
(1) Check the items expressed in daily inspection (daily).
(2)
Lubricate with grease the guides where roller moves. Also, lubricate the grease nipples. (Every month)
(3) Lubricate all the pivoting points and axles. (Every 6 months)
(4) Replace the hydraulic oil for the first time: Accumulated working ten hours’
(5) Replace the hydraulic oil. (Every 12 months)
11.TROUBLE SHOOTING
TROUBLE
CAUSE
REPAIR
1.Faulty wiring.
1.Check the wiring referring to
the actual wiring diagram.
2.Battery socket is disconnected
2.Connect the battery socket.
Platform do not rise while motor
does not run.
3.Battery charge is insufficient.
3.Charge the battery.
1.Faulty adjustment of relief valve.
1.Adjust relief valve again.
2.Faulty hydraulic pump.
2.Replace power pack.
Platform do not rise while motor
runs.
3.Shortage of hydraulic oil.
3.Add oil.
1.Oil leakage in power pack.
1.Replace lowering valve.
Vertical creep of table.
2.Oil leakage form hydraulic circuit.
2.Check hydraulic circuit and repair.
Oil leakage from cylinder.
Faulty sealing.
Replace sealing.
Oil leakage from piping or joint.
Insufficient tightening or seal in
valid.
Tighten joint again or Replace
seal.
Oil leakage from air breather.
Excessive quantity of oil.
Reduce oil quantity.
12. SPECIFICATIONS
Model
CART-1000-DC
Capacity (lbs)
1000
Table (in)
20 ½
×
39 ¾
Min. table height (in)
17 ½
Max. table height (in)
37 ½
Lifting stroke (in)
19 5/8
