9
GB
Reversible door
The door can be changed from right-hinged to left-hinged and vice versa as follows.
1. Incline the wine cooler with
45 degrees, take out right
lower hinge’s screws with
screwdriver (Fig.1)
2. Level the wine cooler. Hold
the door and take out right
upper hinge’s screws with
screwdriver, then take out
the door, put the door safety,
unscrew 2 screws at bottom
and remove the magnetic
switch, then install at top of
frame, rotate door at 180
degree (Fig.2 & Fig.3 & Fig.4)
3. Remove the “safety bracket”
“block B” shown by the
arrows (Fig.5), the three
screws in “the safety bracket”
“block A” is to be loosened,
move “safety brackets”
“block A” to the right. “Safety
bracket” “block A” is to be
mounted on the right side
with screws, then install the
“safety bracket” “block B”
(Fig.5)
4. Take off the hinge from left
upper side then fit the door
with screws then fit the hinge
to right side. (see Fig.6 &
Fig.7)
9
1
2
45
°
3
4
180°
6
7
45
°
6
7
45
°
1
2
45
°
3
4
180°
Limited block
B
Limited block
A
5
Limited block
B
Limited block
A
5
1
2
45
°
3
4
180°
6
7
45
°
Limited block
B
Limited block
A
5
support
support
FS JG48B 16.9.6
AO JG22 16.8.24
location-plate
location-plate
Note
Some wine coolers are equipped with a safety bracket at
the bottom of the cabinet. After installing the safety bracket
on the top of the cabinet, fix the lower safety bracket ac
-
cording to the holes - see page8.