English
- 26 -
the signal is stable and there is no cable loss, there will be no
limitation in case the source content is not HDCP-encrypted.
When using cascade-connected Displays, it is recommended
to set the
DP Stream Setting
as
SST
on all Displays in SST
operation mode.
For proper operation in
MST
operation mode make sure your
source device is MST compliant. If your source device is a
computer check the specifications of its graphic card to ensure
MST
compatibility. When using daisy-chained Displays, it is
recommended to set the
DP Stream Setting
as
MST
on all
Displays in MST operation mode.
HDMI Out
The HDMI port located on the rear left side of the
Display functions as an output port (upper HDMI port,
HDMI Out). This port will not function as an input,
thus no source devices should be connected to this
port. Only the content received from the HDMI input
port located also on the rear left side of the Display
(lower HDMI port, HDMI1 In) can be outputted from
this port. The contents received from other inputs,
such as VGA or Display Port, can not be outputted.
This is a default function and you can not disable/
enable through any menu option. HDMI output port
will always function if a source device is connected
to the specified HDMI input.
Real Time Clock (RTC)
Your Display has an RTC. It is used to maintain the
real date and time information for a period of time if
the energy supply is interrupted by separating the
Display from the mains or by a power blackout. In this
case the Display will use the date and time information
stored in RTC.
•
All time sources are able to override RTC date/time.
•
Display tries to connect to the
NTP server
period-
ically (6 hours after last update) to get the current
date and time information. If the Display successfully
gets these informations from the NTP server, it
updates itself and RTC with the received date and
time information. If the NTP server update fails, the
Display uses RTC time and date to update itself.
•
The RTC battery provides power to the integrated
real-time clock and the calendar. Without any
external power source, RTC is able to function for
a minimum of 14 days.
• If RTC is used as time source, manual date-time set
is enabled from
Date/Time
option in the
Settings>
System
menu.
Controlling With An External PC
1
2
3
4
5
1
RS-232 Input Socket
2
RS-232 straight cable (commercially available)
3
To COM port
4
RS-232 to USB Adaptor
5
PC
You can control the product from an external PC via
RS-232 (COM port) or LAN (Ethernet port) on the
PC. For instance, system source can be changed by
RS-232 from remote computer. When a command is
sent from the PC to the product, the product operates
according to the received command and sends a
response message to the PC.
Equipment/Tools:
•
RS-232 (female) to RS-232(male) cable or LAN
cable (connected via router)
•
USB to RS-232(male) cable
•
Notebook or PC which has USB or LAN port
•
Installed program on remote PC to send commands:
In general, the RS-232 commands are sent for
operating the implemented functions via serial port
