NOTE: All cables shown are not included with the TV.
- Connect the S-VIDEO output of the DVD or VCR to the
S-VIDEO input on the set. The picture quality is improved
compared to connecting a regular VCR to the video input.
- Connect the Audio output of the DVD or VCR to the Audio
input jacks on the set using the RCA cable.
- Connect the Audio output of the DVD or VCR to the Audio
input jacks on the set using the RCA cable.
- Insert a DVD or video tape into the DVD or VCR and press
play. (Refer to the DVD or VCR owner’s manual.)
- Select S-VIDEO input source with INPUT button.
This TV has got Plug and Play capability. The TV sends configuration information (EDID) to the PC using the Video
Electronics Standard Association (VESA) Display Data Channel (DDC) protocol.
2
VGA Cable
Stereo
Audio Cable
Stereo
Audio Cable
TV Back
TV Back
- Connect the RGB output of the PC to the VGA IN
jack on the set.
- Connect the PC AUDIO output of the PC to the
PC AUDIO IN jack on the set.
- Turn on the PC and set.
- Select the VGA input source with INPUT button.
RGB-PC OUTPUT
RGB-PC OUTPUT
AUDIO
Do not connect both VIDEO and S-VIDEO
at the same time.
S-VIDEO Connection
S-VIDEO Connection
DVD or VCR
DVD or VCR
DVD
VCR Back
/
R
L
AUDIO
TV Back
S-VIDEO
Cable
Audio Cable
PC Connection
PC Connection
PCINPUT1
1. To get the best picture quality, adjust the PC graphics card to 1024 x 768@60Hz.
2. If using a sound card, adjust the PC sound as required.
3.Check the image on your TV, there may be noise because of the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution,
change the refresh rate to another rate or adjust the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC graphic card can not be changed,
the PC video
graphic card or consult the manufacturer of the PC.
replae
12
Int roduct ion
All manuals and user guides at all-guides.com