Vestax PMC-55, Руководство пользователя

Страница: 7 / 15

6
CROSSFADER SECTION
MICROPHONE SECTION
TRANSFORMER TRANSFORMER
CF MODE
B
A
14 13 15
○
13
CROSS FADER
Mixes the signal assignes by CROSSFADER
ASSIGN(10) to A side of the crossfader and B side.
When the crossfader is set in the center position,
both A and B can be heard. This is a detachable
fader for ease of replacement with CF-50 when it is
worn out.
○
14
TRANSFORMER SWITCH
With the crossfader moved to either right or left, the
opposite program can be heard instantly by pressing
the opposite
⑳
transformer button.
○
15
CF MODE VOLUME
Adjust the crossfader curve. Clockwise rotation give a
gentle crossfade good for long running mixes. Counter
clockwise rotation gives a steep crossfade good for
scratching and cutting.
○
16
MIC GAIN
Adjusts the input level from each microphone input.
○
17
MIC SELECTOR
Used to select the microphones to be Master section.
○
18
MIC EQ (HI,LOW)
Adjusts the HI and LOW frequencies for all
microphones input.
○
19
MIC LEVEL
Adjusts the input level from all microphones input.
○
20
TALK OVER LEVEL
When TALK OVER SWITCH
◯
21 is depressed, the
level of all sources excluding the microphone input
are reduced. Reduction level can be adjusted by this
control. Clockwise rotation gives a large reduction
level.
○
21
TALK OVER SWITCH
When this switch is depressed, the level of all
sources excluding the microphone input are reduced.
HOW TO REPLACE THE CROSS FADER
●
Remove a knob and four screws which hold the fader
unit.
●
Take the unit out.
●
Carefully remove the multi-cable connector from
the fader unit.
●
Insert the connector to the new fader unit.
●
Replace the knob and the fader unit and fix it with
screws.
EQ
MAX MIN
MAX MIN
1
2
DJ
MIC
+16dB -16dB
+16dB -16dB
HI
LOW
LEVEL
IN
TALK OVER
GAIN
ON
17
18
16
19
20
21
55/E ／面付け 00.9.12 4:44 PM ページ 12