1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
PRE-SET CURVE
SHAPE 1:
SHAPE 2:
SHAPE 3:
SHAPE 4:
C . F. P O S I T I O N
C . F. P O S I T I O N
C . F. P O S I T I O N
Using curve pattern switch, select the crossfader curve pattern from SHAPE1- 4, to set the cross-
fader pattern.
As this curve shape is very sharp, it is
used for hard scratch play.
Setting C.F. FINE CONTROL to
minimum, the curve sharp is most
sharp. As the switch moves closer to
max, the curve sharpness reduces.
This curve shape is "A" type curve.
In this position, switching C.F. FINE
CONTROL from MIN to MAX, the
crossfader curve shape changes
from slow slope curve to sharp slope
by 8 steps.
This curve shape is rectangle wave type. Moving the crossfader from right to left or from
left to right, it performs like a "transformer scratch". Switching C.F. FINE CONTROL, the 8
patterns crossfader curve shape can be selected. It enables selection of the 8 patterns of
curve shape as fig 1- fig 8 below.
C.F. FINE CONTROL : MIN
C.F. FINE CONTROL : MIN
C.F. FINE CONTROL : MIN
C.F. FINE CONTROL : MAX
C.F. FINE CONTROL : MAX
C.F. FINE CONTROL : MAX
C . F. P O S I T I O N
f i g - 3
f i g - 4
f i g - 1
C.F. FINE CONTROL : MIN
f i g - 8
C.F. FINE CONTROL : MAX
f i g - 7
f i g - 6
f i g - 5
f i g - 2