Vestax PCV-003, Руководство пользователя

Страница: 5 / 9

4
3
12
11
13
9
10
3
4 5
7
8
2 2 1 5 4 6
CONTROLS AND FUNCTIONS
TOP PANEL
○
8
HEAD PHONE JACK
Use this jack to connect the head phones. Head
phones from 8 ohm to 600 ohm can be used. 150 ohm
is recommended
○
9
MONITOR SELECT FADER
When the monitor levels of PGM1 and PGM2 are
properly set, PGM1 will be monitored in the headphone
with the fader set to the left side and PGM2 will be
monitored in the head phone with the fader set to the
rigth side. When the fader is set in the center, both
programs will be monitored in the head phone.
○
10
HEAD PHONE LEVEL
Adjusts the head phone output level.
○
11
MASTER LEVEL VOLUME
Adjusts the signal level output from the LINE OUT
jack on the rear panel.
○
12
MASTER BALANCE VOLUME
Adjusts the signal balance of the left and right side
of the outputs from the LINE OUT jack on the rear
panel.
○
13
MIC LEVEL
Adjusts the input level from all microphone inputs.
○
1
POWER LED
The LED is lit when power is on
○
2
INPUT SELECT SWITCH
Used to select the input ( one LINE or one PHONO )
to be sent to each PGM channel.
○
3
INPUT FADER
Used to adjust the input level of each program.
Usually set at the 7-8 position.
○
4
TRIM CONTROL
Adjusts the input level of each channel.
○
5
EQ ( HI, LOW )
Adjusts the HI and LOW frequencies for each PGM
channel.
○
6
INPUT LEVEL METER
The LED level meters indicate the input signal level
of each PGM channel.
○
7
CROSS FADER
When the input level of PGM1 and PGM2 are
Properly set, PGM1 will be heard with the cross
fader set to the left side. PGM2 will be heard with
the cross fader set to the right side. When the cross
fader is set in the center, both grograms will be
heard. This is a detachable fader for the ease of
replacement with "CF-PCV" when it is worn out.