08
09
Control panel features
Installation to faucet
Control Panel Display
Audio functions
Installation to faucet
10
11
12
2
4
5
6
7
3
15
14
13
4
5
6
7
8
1
2
3
ORP Meter Indicator
Level Indicator
Sleep Indicator
Cleaning Indicator
Low Flow Indicator
Menu Selection Indicator
Check Unit Indicator
Alkaline Water Button
9
10
11
12
13
14
15
Menu Selector Button
Purified Water Button
Filter Reset Button
Acidic Water Button
pH Level Indicator
Primary filter life indicator
Secondary filter life indicator
1
8
9
“It is being washed now.”
“Clean water is being extracted now.”
“First grade alkaline water is being extracted now.”
“Second grade alkaline water is being extracted now.”
“Third grade alkaline water is being extracted now.”
“Fourth grade alkaline water is being extracted now.”
“First grade acidic water is being extracted now.”
“Second grade acidic water is being extracted now.”
“Third grade acidic water is being extracted now.”
When automatic cleaning is on
When Alkaline water is selected
When Acidic water is selected
When Purified water is selected
Place the water ionizer near
the sink where the ionizer
will be installed.
1
2
4
5
6
3
Remove the aerator from the
faucet
Remove the compression nut
from the diverter valve and
thread the plastic supply
tubing through it, making
sure to keep the threads of
the compression nut facing
the diverter valve.
Attach the plastic supply
tubing to the diverter by
pressing it onto the compres-
sion nipple and securing
the compression nut to the
diverter valve.
Attach the diverter valve to
the faucet using any included
adapter rings necessary. Be
sure to clean any exposed
threads and apply plumbers
tape to prevent leaks. If
installing to a faucet,
please contact your dealer
for informationon a
specialty adapter that
may be required.
