Vessel IPC-A4, Инструкция по эксплуатации

Страница: 35 / 40

35
■Maintenance
1. Turning the switch off Turn off the power switch, and always confirm that the fan has
stopped completely.
2. Opening the front cover
Loosen the urea screw on the front, and
pull the front window upward.
3. Removing the adhesive
gel sheet plate (lower
section)
Remove the adhesive gel sheet plate
from
the bottom of the interior of the cabinet.
* Magnets are attached on the back of
the plate. Please lift the plate a little
and pull out.
4. Removing the adhesive
gel sheet plate (rear
surface section)
Remove the adhesive gel sheet plate from
the rear surface section of the cabinet.
5. Washing the adhesive gel
sheet
After washing the adhesive gel sheet in
water, dry it out completely. The drying
process can be hastened by wiping up any
extra moisture from the sheet with a dry
clean cloth, etc.
6. Attaching the adhesive
gel sheet plate (back
surface section)
First, replace the cleaned adhesive gel sheet plate in the rear surface
section of the cabinet. Attach the plate, while being careful not to let
the plate touch the N-3 unit.
7. Attaching the adhesive
gel sheet plate (lower
section)
Next, attach the adhesive gel sheet plate in the lower section of the
cabinet.
8. Closing the front cover Close the front window, and tighten the urea screw.