Vesper VA1210, Руководство по проверке

Страница: 7 / 12

Vesper - Confidential
7
Wearing the TWS: Quality of Fit and Cable Slack
•
TWS prototype should be worn properly to ensure a
high-quality VA signal.
• Make sure the TWS fits tightly inside the ear.
• If the fit is too loose, use a larger rubber eartip .
•
If the TWS mockup has cables, follow these steps:
1. Make sure that there is slack in the cables.
•
Cables connected to TWS should be loose (not pulling tight)
•
Use tape to secure cable and reduce tension. This also reduces cable
fluttering during wind testing.
2. Place the interface board near the wearer
•
The interface board (connected to the TWS with cables) should not
be too far. It could be on a nearby table, or strapped to the shoulder.