vesper marine WatchMate Vision, Инструкция по установке

Страница: 2 / 16

Your WatchMate Vision
®
is a Class B AIS Transponder with
a Color Touch Display and integrated NMEA 2000 and WiFi.
The WatchMate provides information to improve your situational awareness
and assist in avoiding collisions at sea. Because it consumes very low power, it
may be left turned on whenever your vessel is underway. It works by interpreting
Universal Shipborne Automated Identification Systems (AIS) messages which are
sent over VHF by transponders installed on other vessels. The AIS system uses two
dedicated VHF channels designated for this purpose and with the installation of the
WatchMate to receive these signals you can view AIS information. You can also
distribute AIS information to other devices on board your vessel (e.g. chart plotters,
laptops, smart phones) using NMEA 2000, USB and WiFi. In addition, your vessel data
is transmitted to all other AIS-equipped vessels within range.
For more information on go to www.vespermarine.com/vision.
OPTIONAL ACCESSORIES
WHAT YOU NEED TO GET GOING
= Item Included
= Item Included
WatchMate Vision
Mounting Bracket
10 pin power/data cable
AIS/VHF antenna
MMSI number
2A fuse or circuit breaker
1m USB cable (for configuration)
Panel mount template, gasket and 4 screws (cut these to the required length)
Waterproof 5m USB cable with locking security ring
NMEA 2000 cable, T connector and network extension cable
SP160 Antenna Splitter
External GPS Antenna with 10m cable
External alarm buzzer
Consider other equipment you may need to install this on your vessel e.g.
additional cable, cable ties, mounting screws, wire strippers, screwdriver etc.