VESPA S 125ie 3Valvole, Руководство пользователя

Страница: 62 / 90

03_28
03_29
Headlight adjustment (03_28, 03_29)
Proceed as follows:
- Position the vehicle in running order and with the tyres inflated to the prescribed
pressure, onto a flat surface, 10 m away from a half-lit white screen; ensure that the
longitudinal axis of the vehicle is perpendicular to the screen;
- Turn on the headlight and check that the borderline of the projected light beam on
the screen is not higher than 9/10 or lower than 7/10 of the distance from the ground
to the centre of the vehicle headlamp;
- Otherwise, adjust the right headlight with the screw « A ».
N.B.
THE ABOVE PROCEDURE COMPLIES WITH THE EUROPEAN STANDARDS RE-
GARDING MAXIMUM AND MINIMUM HEIGHT OF LIGHT BEAMS. REFER TO THE
STATUTORY REGULATIONS IN FORCE IN EVERY COUNTRY WHERE THE VE-
HICLE IS USED.
03_30
Front direction indicators (03_30, 03_31)
To replace the bulbs:
1. Remove the turn indicator from its fitting by undoing the screw « A ».
2. Take out the bulb holder « B » from its fitting by turning it anticlockwise.
3. Press the bulb, turn it anticlockwise and then take it out.
To refit, proceed in reverse order.
62
3 Maintenance