VESPA S 125 Скачать руководство пользователя страница 18

Страница: 18 / 80

02_01

Checks (02_01)

Before using the vehicle, check:

That the fuel tank is full.

The oil level in the rear hub.

The engine oil level.

That tyres are properly inflated.

The correct functioning of the headlights, tail light, turn indicators, stop light and

license plate light.

The correct functioning of the front and rear brakes.

That the front brake fluid level is correct.

02_02

Refuelling (02_02)

Reach the fuel tank and unscrew the cap «

».

Use premium unleaded petrol, with minimum octane rating of 95.

A specific gauge on the instrument panel indicates the fuel level.

WARNING

SWITCH OFF THE ENGINE BEFORE REFUELLING WITH PETROL.

PETROL IS HIGHLY INFLAMMABLE.

DO NOT SMOKE AND KEEP OPEN FLAMES AT A DISTANCE:FIRE HAZARD.

DO NOT INHALE FUEL FUMES.

DO NOT ALLOW PETROL TO COME INTO CONTACT WITH HOT ENGINE OR
ANY PLASTIC PARTS.

2 Use

Содержание S 125

















































































Результаты поиска

Содержание S 125

Отзывы:

Похожие инструкции для S 125

Бренды по названию

Популярные бренды

VESPA S 125, Руководство пользователя

Результаты поиска

Содержание S 125

Отзывы:

Похожие инструкции для S 125

Бренды по названию

Популярные бренды