VESPA S 125 ie, Руководство пользователя

Страница: 43 / 80

03_17
Checking the brake oil level (03_17)
The brake fluid reservoir is equipped with a sight glass « A » made of transparent ma-
terial; the quantity of liquid contained in the sight glass indicates the level of liquid in
the reservoir.
When the sight glass « A » is full, the level inside the reservoir exceeds the MIN level;
when it is partially full, the level drops to the MIN level; when it is fully empty, the level
of fluid in the reservoir is below the MIN level.
The brake fluid level may fall due to wear on the brake pads. In case the pad wear is
below the minimum mark, contact an
Authorised Service Centre to have the braking
system thoroughly checked.
03_18
Braking system fluid top up (03_18, 03_19, 03_20)
Proceed as follows:
1 . Remove the rear-view mirrors.
2 . Undo the two screws « A ».
3 . Undo the screw « B » and remove the front handlebar cover.
4 . Remove the reservoir cover « C » by loosening the two fixing screws « D » and refill
with the prescribed brake fluid type only and without exceeding the maximum level.
Under standard climatic conditions, replace fluid as indicated in the scheduled main-
tenance table. This operation must be carried out by trained technicians; take your
scooter to an
authorised Service Centre or Dealer.
WARNING
ONLY USE DOT 4 CLASS BRAKE FLUIDS. BRAKING CIRCUIT FLUIDS ARE
HIGHLY CORROSIVE. MAKE SURE THAT IT DOES NOT COME INTO CONTACT
WITH THE PAINTWORK
.
43
3 Maintenance