VESPA GTS 125 Скачать руководство пользователя страница 57

Страница: 57 / 90

03_32

Rear optical unit (03_32)

Remove screw «

» to remove the rear headlight assembly.

Access to taillight bulbs, stop light bulb and license plate bulb.

To reassemble, repeat the operation in the reverse order.

N.B.

IF MISTING IS NOTICED ON THE INSIDE OF THE HEADLAMP GLASS, THIS
DOES NOT INDICATE A FAULT AND IS ATTRIBUTABLE TO HUMIDITY AND/OR
TO LOW TEMPERATURES.

THE PHENOMENON SHOULD QUICKLY DISAPPEAR WHEN THE LIGHT IS
SWITCHED ON.

THE PRESENCE OF DROPS OF WATER, ON THE OTHER HAND, COULD INDI-
CATE THAT WATER IS INFILTRATING. CONTACT THE AFTER-SALES SERVICE
NETWORK.

03_33

Rear turn indicators (03_33)

To gain access to the turn indicator bulbs, remove the fastening screws «

».

The bulbs have a bayonet coupling, to remove them press gently and twist anticlock-
wise about 30°. To refit follow the same steps but in reverse order.

3 Maintenance

Содержание GTS 125



























































































Результаты поиска

Содержание GTS 125

Отзывы:

Бренды по названию

Популярные бренды

VESPA GTS 125, Руководство пользователя

Результаты поиска

Содержание GTS 125

Отзывы:

Бренды по названию

Популярные бренды