manualshive.com logo in svg

VESALA PKT2, Руководство пользователя

Поделиться
Скачать
VESALA PKT2 Скачать руководство пользователя страница 12

User Manual Vesala Transmitter PKT2 X2.0 ENG

 

12 (20)

 

4

 

Operating Transmitter PKT2 

4.1

 

Inspecting the work site for hazards 

Carefully examine the drilled structure and surroundings for hazards before drilling. 

  DANGER

: Risk of electric shock, fire, or property damage 

Drilling a structure may damage a dangerously live electric cable or a pressurised pipe. Before 
drilling a structure, make sure the structure doesn’t contain dangerously live cables or 
pressurised pipes. If their existence cannot be excluded, the whole installation containing the 
structure should be de-energized and de-pressurised before drilling begins. In some cases, a 
decrease in locating accuracy may move the intended drill point. 

4.2

 

Locating hazards with Transmitter PKT2 

Transmitter PKT2 includes both metal and voltage detectors. Place the transmitter against the 
surface of the structure and move it slowly around the intended drill spot. Do this on both sides 
of the structure. When the metal detector or voltage detector LEDs turn on, it may be an 
indication of metal or a dangerously live object nearby. The more LEDs are illuminated and the 
higher the pitch of the sound indication, the closer or larger the object is. 

  WARNING

: Risk of electric shock, fire, or property damage 

When scanning a structure for live cables with the device, notice that the effective range of the 
voltage detector is limited, and scanning should be done from both sides of the drilled structure 

Содержание PKT2





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды