![background image](http://html1.mh-extra.com/html/ves/ax315-4-1/ax315-4-1_installation-operation-and-maintenance-manual_1008646002.webp)
ORIGINAL INSTRUCTIONS
2
Short Case Axial Fans
Installation, Operation & Maintenance Manual
VES Andover Ltd. Eagle Close, Chandlers Ford Ind. Est, Eastleigh, Hampshire, SO53 4NF
Tel: 08448 15 60 60 Fax: 02380 26 12 04 E-mail: [email protected] Web: www.ves.co.uk
Unit Description
Typical example
2
Part Number Coding
The
VES Short Case Axial
range is a general purpose fan for moving relatively large quantities
of air against a limited system resistance. They are suitable for a wide range of
applications with an operating temperature of -30 to
50 ºC
. The fan motor is thermal class
THCL155 with IP54 protection.
The impellor is sickle-bladed and the fan housing is manufactured from aluminium with a
fully weatherproof paint finish.
All fans in the Short Case Axial range are speed controllable.
For further technical details regarding dimensions and weights, contact VES Andover Ltd on
08448 15 60 60
, quoting the sales order (SO) number and the unit type as found on the unit
nameplate or visit www.ves.co.uk.
Introduction
1
Immediately upon receipt of goods, check for possible damage in transit.
Also check to ensure that any ancillary items are included. These will normally be
supplied fitted or taped to the unit (in the case of small items).
In the event of any damage having occurred or if any item found to be missing, it is
essential to inform VES Andover Ltd. within
3 working days
of delivery quoting sales
order (SO) number and the unit type as found on the unit nameplate. After this period
we will be unable to accept any claim for damaged or missing goods.
Receipt of Goods
& Handling
3
AX350/4-1
AX
350
/4
-1
1
2
3
4
Point Description
Point Variants
Details (as appropriate)
1 Product
AX
Short Case Axial Fans
2 Fan Size
315...630
Nominal Fan Blade Diameter (in mm)
3 Motor Poles
4, 6
Number of motor poles
4 Phase
-1
230V 50Hz Single Phase
-3
400V 50Hz Three Phase
Installation
4
The entire system must be considered for safety purposes and it is the responsibility of the
installer to ensure that all of the equipment is installed to compliance with the
manufacturers recommendations, with due regard to the current HEALTH AND SAFETY AT WORK
ACT and conforms to all relevant statutory regulations.
Where a unit is installed so that failure of components could result in injury to personnel,
precautions should be taken to prevent such an injury. It is the installers responsibility to
ensure that access panels are not obstructed in any way and safe working access for
maintenance must be provided in accordance with the Health and Safety, and Building
Regulations. For confirmation of required access please see the appropriate unit outline
drawing.
Consideration must also be given by the installer for adequate illumination of the unit
location in order for safe maintenance. Further consideration should be given to the units
position and secured into place as appropriate. This is especially important with external
mounting as the wind and elements may effect overall stability.
All manuals and user guides at all-guides.com