71
Copyright © Veryx Technologies Pvt. Ltd
.
Executing Latency Tests
7.
In the
Duration (sec)
box, type or select the test duration. Here, the test
duration is set to 5 seconds.
The
# of Iterations
box is disabled in this mode as the test is set to repeat for 4 iterations.
8.
In the
Iteration Delay (sec)
box, specify the number of seconds the test
should pause before it starts the next iteration.
9.
In
Warmup Time (sec)
, specify the number of seconds the test should wait
after the handshake with the controller is completed.
10.
Click
to run the test.
The
Test Status for Performance Test- Latency Incremental Switch Mode
screen
(Figure 53 and Figure 54) shows the test execution progress for a latency test in
Incremental Switch mode
of the participating switch group network. The responses
are measured based on
Flow Mod
messages.
Figure 53: Latency Incremental Switch Mode (Upper)
