6 English
I n s e r t t h e m e m o r y c a rd
Be careful when handling, inserting or removing the memory card.
R e p l a c e t h e b a t t e r y
R e p l a c e t h e b a t t e r y c o v e r
To open the memory card
holder (1), apply light
pressure, and slide to the
left. Move the card holder
into a vertical position.
Place the memory card in
the card holder, aligning it
with the diagram on the
card holder.
Lay the card holder on top
of the contacts, apply light
pressure and slide to the
right until it locks into place.
Insert the battery at an
angle (1) so that the battery
contacts align with the
contacts in the battery
compartment.
Lower the battery into the
battery compartment (2)
and ensure that the battery
is seated correctly before
replacing the battery cover.
To replace the battery
cover, carefully insert the
internal clip(1) on the inside
of the battery cover into the
slot below the battery (2).
Lower the battery cover into
position (1) until it clicks
into place. The cover
should close tightly using
only light pressure.
1
amelia_en.book Page 6 Wednesday, July 15, 2009 9:29 AM
