Rack PDU VP9559, VP7552, and VP7551Instruction Manual
Page 27
6.2.4.
ELECTROSTATIC DISCHARGE
Vertiv strongly recommends that an anti-static precautions be taken when installing, removing,
or working on and around static sensitivity equipment. Industry approved anti-static devices
such as wrist and heel straps, in conjunction with conductive foam pads, should be available
and implemented only after verifying that they are in good working condition.
Electronic components such as memory modules, circuit boards, and LED displays, are sensitiv-
ity to Electro-Static Discharge (ESD). Handling of such components should be done only after
proper anti-static workspace conditions have been established. Any static producing packing
materials such as plastic, Styrofoam, and some cardboards, should be removed and discarded
in a timely manner.
6.2.5.
EXPLOSIVE ENVIRONMENT
Do not operate this equipment in the presence of flammable gases or fumes. Operation of any
electrical equipment in such an environment constitutes a definite safety hazard.
6.2.6.
SERVICING AND ADJUSTMENTS
Do not attempt to service this equipment, there are no field serviceable parts or sub-assem-
blies. Any adjustments should be made by authorized service personnel only.
6.2.7.
REPAIRS AND MODIFICATIONS
Because of the danger of electrocution and/or severe health hazard, do not install substitute
parts or preform any unauthorized modifications of this equipment. It is best to contact Vertiv
for Warranty and Repair Service to ensure that safety features are maintained.
