System Application Guide
SAG582120600
Spec. No. 582120600 (Model 801DB
NVGB
)
Revision BK, September 27, 2017
Page 19 of 75
List 145: Bay Input Feed and Shunt Assembly (2 Cables, 50 mV. Shunts)
Features
♦
Provides landing points for two (2) input leads (on each side).
♦
Provides an 800A, 50mV shunt (both sides).
♦
Can be rotated for top or bottom feed configurations.
♦
See
under
Wiring Illustrations
in ACCESSORY DESCRIPTIONS for
input termination specifications.
Restrictions
For use in Lists
105
and
Ordering Notes
1)
Order as required. Each List 145 provides input terminations and shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 145 and specify top or
bottom feed.
For top and bottom feed multi-load applications, order one (1) List 145 for each Side
A/Side B load and specify top or bottom feed.
2)
Order input lugs as required per
DC Input Cable Sizes and Lugs Selection
under
Wiring
Notes
in ACCESSORY DESCRIPTIONS.
List 147: Bay Input Feed and Shunt Assembly (4 Cables, 50 mV. Shunts)
♦
Provides landing points for four (4) input leads (on each side).
♦
Provides an 800A, 50mV shunt (one per side).
♦
Can be rotated for top or bottom feed configurations.
♦
See
under
Wiring Illustrations
in ACCESSORY DESCRIPTIONS for
input termination specifications.
Restrictions
For use in Lists
105
and
Ordering Notes
1)
Order as required. Each List 147 provides input terminations and shunts for both sides.
For top and bottom feed 2-load applications, order one (1) List 147 and specify top or
bottom feed.
For top and bottom feed multi-load applications, order one (1) List 147 for each Side A/Side
B load and specify top or bottom feed.
2)
Order input lugs as required per
DC Input Cable Sizes and Lugs Selection
under
Wiring
Notes
in ACCESSORY DESCRIPTIONS.
