Vertiv Liqui-tect LP6000 Скачать руководство пользователя страница 57

Страница: 57 / 82

Updating Firmware

LP6000 firmware updates are available from technical support: Telephone: 800-222-5877 option 2,
Outside the US: 614-841-6755 E-mail: [email protected]

1. Obtain the updated firmware (.bin file), and save it to local disk.

NOTE: Do not change the file name. If the file name is changed, it will not be recognized by LP6000 and
the update will fail.

2. Select

Configuration

System/Flash Management

System/Flash Management

on page 55 opens.

3. Click

Choose File

and browse to select the firmware (.bin), then click

Upload

The configuration uploaded. The currently-loaded firmware version is displayed in the Flash
Application field on the

Identity Page

on page 36.

Capturing LCD-display screens

You can capture, and download screen captures of the current LDC display.

1. On the LCD display, navigate to the screen to capture.
2. On the web UI, select

Configuration

System/Flash Management

System/Flash Management

on page 55 opens.

3. Click

LCD Capture

The displayed screen is captured.

4. Click

Download LCD Capture File

The captured image opens in the web browser.

5. Right-click the image, and

Save image as

to save the file with a descriptive name.

Updating LCD-display Firmware

1. On the web UI, select

Configuration

System/Flash Management

System/Flash Management

on page 55 opens.

2. Click

LCD Program

and OK to confirm

The LCD display firmware updates.

Vertiv

| Liqui-tect LP6000 Installer/User Guide |

Содержание Liqui-tect LP6000



















































































Результаты поиска

Содержание Liqui-tect LP6000

Отзывы:

Похожие инструкции для Liqui-tect LP6000

Бренды по названию

Популярные бренды

Vertiv Liqui-tect LP6000, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Liqui-tect LP6000

Отзывы:

Похожие инструкции для Liqui-tect LP6000

Бренды по названию

Популярные бренды