To contact Vertiv Technical Support: visit www.VertivCo.com
© 2017 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names,
trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no
responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
LIEBERT® MPX™ PEM
Quick Installation Guide
SL-20821_REV7
590-1624-501B
2
damage to the latches, do not
exceed a maximum torque of
18 in/lbs (2 Nm).
5. Verifying MPX™ PEM
installation
Conduct a visual inspection to verify
the MPX PEM has been properly
installed. A slight side-to-side
rocking of the module should not
cause separation from the MPX PRC
surface.
6. Connecting the MPX™ IPC
(for the MPXPEM-NVAXXAX
model only)
Insert the MPX IPC connector in the
MPX PEM installed on the MPX PRC.
See the MPX IPC Quick Installation
Guide for installation steps.
7. Installing the RPC web card
If used, install the optional
RPC™ web card. See the
RPC-1000™ Communications
Module Installer/User Guide or
the RPC2™ Communications
Module Installer/User Guide for
further instructions.
4
4
Securing the MPX™ PEM Screw Latches
