Vertiv Liebert IntelliSlot WEBRT3N, Руководство пользователя, Страница: 17 / 28

General
MIB Systems
System Name
—names the IS-WEBRT3N card.
System Contact
—lists a name for the administrator.
System Location
—sets the IS-WEBRT3N card’s location.
SNMP UDP Port
NetAgent SNMP Port—
The port that receives and sends the SNMP command. Default is 161.
Trap Receive Port—
The port that receives the trap. Default is 162.
SNMPv3 Engine ID
SNMPv3 Engine ID Format Type—
The card requires an Engine ID for identification to generate
authentication and an encryption key. The format type can be selected from the drop-down menu.
SNMPv3 Engine ID Text—
The SNMPv3 Engine ID content
NOTE: When finished, click Apply . The NetAgent will reboot.
Access Control section
Manager IP Address
—sets the IP address so that the administrator can manage the IS-WEBRT3N card. It
is valid for up to eight IP addresses. To manage the IS-WEBRT3N card from any IP address, enter *.*.*.* into
the IP address. Options available are: All, V1, V2C, and V3.
Version—
Use the drop-down menu to select among SNMPv1 and SNMPv2, SNMPv3 or All. If using
SNMPv3 or All, a username, password, authentication and privacy are required.
Community
—sets a Community name for NMS. The community name must be the same as the setting in
NMS.
Permission
—sets options for administrators. Options are Read, Read/Write, and No Access.
Description
—for an administrator to make notes.
Vertiv | Liebert® IS-WEBRT3N™ Card User Manual | 17