Vertiv Liebert IntelliSlot Unity Card Скачать руководство пользователя страница 41

Страница: 41 / 74

Kerberos Authentication

Kerberos Settings

[Enable/Disable selection]

Enables Kerberos authentication in the card.

Server (Realm)

IP address of the Kerberos server.

Realm Domain Name

Name of the realm of systems that share the Kerberos database.

Domain Name

Domain where Kerberos database resides in the master system..

6.4.4 Network Folder

The top level of the Network subfolder displays the following:

Speed Duplex

Selects the speed and duplex configuration of the card’s Ethernet port. It is set to Auto by default. If
it requires changing, contact the system administrator for the proper settings.

Hostname

Identifies the network node. Default = UNITY-

serial_number_of_card

Domain Name Suffix List

Listing of domain name suffixes for resolution of host names. If it requires changing, contact the
system administrator for the proper setting.

Telnet Server

Enables/Disables telnet access to the card to prevent unauthorized changes. The default setting
disables telnet access.

SSHv2 Server

Enables/Disables SSHv2 (Secure SHell) access to the card to prevent unauthorized changes. The
default setting disables SSHv2 access.

The Network folder also contains subfolders related to communication:

•

IPv4 and IPv6 Folders

on the next page

•

Domain Name Server (DNS) Test Folder

on page 39

6 Editing the Unity Card Configuration

Содержание Liebert IntelliSlot Unity Card











































































Результаты поиска

Содержание Liebert IntelliSlot Unity Card

Отзывы:

Vertiv Liebert IntelliSlot Unity Card, Инструкция по установке и эксплуатации, Страница: 41 / 74

Результаты поиска

Содержание Liebert IntelliSlot Unity Card

Отзывы: