Vertiv Liebert IntelliSlot Unity Card Скачать руководство пользователя страница 43

Страница: 43 / 74

Default Gateway

IP address of the gateway for network traffic destined for other networks or subnets. Default = 64.

DNS Server Address Source

Source of DNS server identification (None, Automatic, Configured). Default = Automatic.

Primary DNS Server

Secondary DNS Server

Domain Name Server (DNS) Test Folder

The Domain Name Server Test checks key points of a Domain Name Server (DNS) setup for a given
domain.

Domain Name Server (DNS) Test Settings

Last Query Response

Response from a domain name server (DNS) to the last query.

Example:

gxtwebdemo.liebert.com

resolved to

126.4.203.251

Type of Query

Type of DNS query. (Hostname, IP Address)

Query Value

Value for the domain name server (DNS) to resolve. Example:

gxtwebdemo.liebert.com

6.4.5 Web Server Folder

The Web Server Settings permits making some security settings, such as HTTP or HTTPS, and password
enabling.

Web Server Settings

Web Server Protocol

Select the operation mode of the Web Server (HTTP, HTTPS). Default = HTTP.

HTTP Port

Standard web port not encrypted. Required if HTTP is enabled as Web Server Protocol. Default = 80.

HTTPS Port

Standard secure Web port; all communication is encrypted. Required if HTTPS is enabled as Web
Server Protocol. Default = 443.

6 Editing the Unity Card Configuration

Содержание Liebert IntelliSlot Unity Card











































































Результаты поиска

Содержание Liebert IntelliSlot Unity Card

Отзывы:

Vertiv Liebert IntelliSlot Unity Card, Инструкция по установке и эксплуатации, Страница: 43 / 74

Результаты поиска

Содержание Liebert IntelliSlot Unity Card

Отзывы: