3 Pre-installation Preparation
WARNING! Risk of improper moving. Can cause serious injury or death. Building and equipment damage may
also result. Use only lifting equipment that is rated for the unit weight by an OSHA-certified rating
organization. The center of gravity varies depending on the unit size and selected options. The slings must
be equally spaced on either side of the center of gravity.
CAUTION: Risk of contact with sharp edges, splinters, and exposed fasteners. Can cause injury. Only
properly trained and qualified personnel wearing appropriate, OSHA-approved PPE should attempt to move,
lift, or remove packaging from the unit in preparation for unit installation.
NOTICE
Risk of improper lifting. Can cause equipment damage. Make sure that the spreader bars are wider than the
unit. If the spreader bars are too short, the slings may crush the unit.
NOTICE
Risk of doorway/hallway interference. Can cause unit and/or structure damage. The unit may be too large to fit
through a doorway or hallway while on the skid. Measure the unit and passageway dimensions, and refer to the
installation plans prior to moving the unit to verify clearances.
NOTICE
Risk of improper storage. Keep the unit upright, indoors and protected from dampness, freezing temperatures
and contact damage.
Upon arrival of the unit and before unpacking:
•
Verify that the labeled equipment matches the bill of lading.
•
Carefully inspect all items for visible or concealed damage.
•
Report damage immediately to the carrier and file a damage claim with a copy sent to Vertiv™ or to your sales
representative.
3 Pre-installation Preparation
9
Vertiv™ Liebert® CRV CCD25 and CCD35 Condensers User Manual