background image

 
 

Vertiv

 

|

 

eSure™ Power Extend Converter Mounting Bracket Kit Installation Manual (IM565391)

 

|

 

Rev. A 

eSURE™ POWER EXTEND CONVERTER MOUNTING 

BRACKET KIT INSTALLATION INSTRUCTIONS 

Kit Description 

Mounting bracket kits have been designed to easily install an eSure™ Power Extend Converter (Model 
C48/58-1000B, Spec. No. 1C48581000B) into a distribution position of a NetSure™ Power System (see 
UM565050 for kit part numbers and descriptions).  See 

Table 1

 for the kits covered by these instructions. 

These instructions provide a step-by-step procedure to field install an eSure™ Power Extend Converter using 
one of the kits listed i

Table 1

.  Installation of this kit in other systems not listed i

Table 1

 should not be 

attempted. 

 

Table 1:  

Power System Mounting Bracket Kits Covered by these Instructions 

Mounting Bracket 

Kit P/N 

Description 

565391 

For use with a List AA (24-position bullet) distribution panel installed in a 

Spec. No. 582127000 power system. 
For use with a List DA, DB, DC, DD (21-position bullet dual voltage) 

distribution panel installed in a Spec. No. 581127000 or 582127000 power 

system. 

565459 

For use with a List AL (26-position bullet) distribution panel installed in a 

Spec. No. 582127000, 582127000100, 582127000101, 582127000102, 

582127000103, 582127000203 power system. 
For use with a List DE, DF, DG, DH, DJ, DK (26-position bullet dual voltage) 

distribution panel installed in a Spec. No. 581127000 or 582127000 power 

system. 

565601 

For use with a List AA, AM, AN (24-position bullet) distribution panel 

installed in a Spec. No. 582126000 or 582125000 power system. 
For use with a List JA, JB, JC (20-position bullet dual voltage) or List JD 

(22-position bullet dual voltage) distribution panel installed in a Spec. No. 

581126000, 581125000, 582126000, 582125000 power system. 

 

 

Mounting Bracket Kit Contents 

Table 2

Table 3

, and 

Table 4

 list the items furnished as a part of the various mounting bracket kits covered by 

these instructions.  Before installing a mounting bracket kit, check the items furnished against those listed to 
ensure that there are no shortages. 

Содержание eSure 565391



































Отзывы: