3
Vertiv
| Network Camera Quick Operation Guide | v01 | UD.6L0201D0146A02
2.0 INSTALLATION
NOTES:
Read the following contents carefully before the installation.
Make sure that all the related equipment is power-off during the installation.
Check whether the power supply is matched with your AC outlet to avoid damage.
Do not place the camera in extremely hot or damp environment. To avoid heat accumulation, good
ventilation is required for a proper operating environment. You may refer to the specification of the
product for the detailed information about installation environment.
If the product does not function properly, please contact your dealer or the nearest service center.
Do not disassemble the camera for repair or maintenance by yourself.
The bullet camera can be installed to both wall and ceiling. This quick guide takes wall mounting steps as an
example.
Steps:
1. Use the screws to fix the mounting base to the ceiling; rotate the back box counterclockwise to secure it to
the mounting base; use the lock screw to secure the dome camera.
Lock screw
Figure 2-1 Fix the Mounting Base
