ALPHA 900 - 1800
Battery charger / DC Power Supply
VertivCo.com
30 avenue Montgolfier
– BP90
69684 Chassieu
France
Tel: +33 (0)4 72 47 63 77
[email protected]
Notice : 6012559
Révision : 03
Version : UK
Date : 09/05/17
Visa : ELA
© 2017 Vertiv Co. All rights reserved. Vertiv, the Vertiv logo and Chloride are trademarks or registered trademarks of Vertiv Co. All other names and logos
referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and
completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or
omissions. Specifications are subject to change without notice.
3
CONFIGURATION
Mode selection
– output voltage
Position of Used as
Mode selector model
Charger
Power Supply
External
setting
12 V
24 V
48 V
120/110 V
240/220 V
13.6 Vdc
27.2 Vdc
54.5 Vdc
136.2 Vdc
272.4 Vdc
N/A
N/A
N/A
122.6 Vdc
245.2 Vdc
12.0 Vdc
24.0 Vdc
48.0 Vdc
120.0 Vdc
240.0 Vdc
N/A
N/A
N/A
110.0 Vdc
220.0 Vdc
0 à 15 Vdc
0 à 30 Vdc
0 à 60 Vdc
0 à 150 Vdc
0 à 300 Vdc
N.B.:
Charger
or
Power supply,
values in this table are factory settings. Potentiometer U allows adjusting output voltage by roughly ±5%.
N.B.: when terminals 10 and 11 are strapped, output voltage raises by 3,8% (Boost function)
CONFIGURATION in mode controled by supervisor QUARTZ :
▪
IB and U switches of selector must be
in
External setting
position
▪
The terminals of ALPHA (+ Out) and
(
– Out) must be connected at
terminals (+) and (-) of QUARTZ
▪
NO strap on the terminals 8-9
▪
For more details, to see the note KIT
Supervision (36048-6008052-EN)
VERY IMPORTANT
(in particular in case of replacement of ALPHA unit on site).
Above, the “Factory configuration” can be modified according to your use on site.
For any other operating process and U & IB adjustments, to refer to the table below.
CAUTION
FACTORY
CONFIGURATION
Charger
VRLA batteries
without
QUARTZ supervisor
Mode selector
Output voltage U setting
Battery current IB setting
Mains ON led
Mode selector
(switch 1234)
