Vertiv™ NetSure™ IPE Series -48 VDC Outdoor Rectifier Installation and User Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
75
6.3
Opening / Closing the Front Access Panel
DANGER!
Hazardous voltages are exposed when the cover is opened, and power is applied to the unit.
Refer to the following procedures to open and close the rectifier enclosure front access panel.
6.3.1
Opening the Front Access Panel
Procedure
1.
Rotate the access panel clockwise 180° around the hardware of the top left corner. Refer to Figure 6.2 and Figure 6.3.
Tighten the hardware circled in Figure 6.3 to secure the access cover in the open position.
Figure 6.2 Remove the Access Panel with Phillips Screwdriver
Figure 6.3 Rotate the Panel Clockwise 180°Around the Hardware of the Top Left Corner,
Tighten the Hardware Circled Below to Secure Open
6.3.2
Closing the Front Access Panel
Procedure
1.
Close the access cover and torque the screws to 2.5 Nm. See Figure 6.4.
Removable Access Panel with
Phillips screwdriver