Vertiv™ NetSure™ IPE Series -48 VDC Outdoor Rectifier Installation and User Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
2
1.2.2
1R482000C2-2 Packing List
Refer to Table 1.2.
Table 1.2 1R482000C2-2 Packing List
Description
Qty
Notes
Rectifier, Quick Connect Type, with controller
1
--
Mounting Bracket – Part A
2
For pole and wall mounting (P/N: 63240ETT).
Mounting Bracket – Part B
1
For pole mounting only (P/N: 63240ETS).
Cross Recessed Countersunk Screw
2
For pole mounting.
Phillips Outer Hex Screw
6
For pole and wall mounting.
Pole Mounting Bands
2
Pole diameters from 60 mm to 120 mm OD.
User Manual
1
For 1R482000C2-1, 1R482000C2-2, and 1R482000C2-3.
Connector, DC 2kW Output (Customer Side)
2
One used for 2kW load, one used for 2kW battery landing, if
required.
Connector, DC 1kW Output (Customer Side)
2
--
Connector, AC Input (Customer Side)
1
--
Connector, DB-15 Output (Customer Side)
1
--
Connector, DB-9 I/O (Customer Side)
1
--
NOTE!
The rectifier is equipped with plug-in customer cable connectors. Mating halves to these connectors are
furnished as detailed above. Customer to supply and connect the cables to these mating half connectors. Cable
assemblies with the appropriate mating half connector are available. See “Accessories” on page 3 for part numbers.
1.2.3
1R482000C2-3 Packing List
Refer to Table 1.3.
Table 1.3 1R482000C2-3 Packing List
Description
Qty
Notes
Rectifier, PG Terminal Type, with controller
1
--
Mounting Bracket – Part A
2
For pole and wall mounting (P/N: 63240ETT).
Mounting Bracket – Part B
1
For pole mounting only (P/N: 63240ETS).
Cross Recessed Countersunk Screw
2
For pole mounting.
Phillips Outer Hex Screw
6
For pole and wall mounting.
Pole Mounting Bands
2
Pole diameters from 60 mm to 120 mm OD.
User Manual
1
For 1R482000C2-1, 1R482000C2-2, and
1R482000C2-3.
NOTE!
The rectifier is equipped PG terminal type cable connectors. Customer to supply and connect the cables to
these terminals.
