Vertiv
™
| Liebert® AHU | Technical Manual
16
Figure 5-2 Upper Section & Lower Section
The width of the AHU is relatively large, and the unit can acquire multiple cabinets, so the ground is required to be very flat.
Therefore, the customer needs to make a floor stand to meet this condition.
This floor stand is also conducive to the connection of the AHU condensate drain pipe, so it is recommended that the height
be above 100 mm.
is a schematic diagram of the floor stand for customers’ reference.
Figure 5-3 Schematic diagram of floor stand
Lower Section
Upper Section
