28 Chapter 2 Installation
ECM3 Series Outdoor Power System User Manual
2.3.2 Opening And Closing Cabinet Door
Procedures for opening and closing the cabinet door are as follows:
1. Loosen the movable baffle plate of the key hole by using a miniature angle wrench attached to a key string (see
Figure 2-13), and remove the baffle plate to expose the key hole.
Movable baffle plate
Padlock installation position
Miniature angle wrench
Fixing screw of movable baffle plate
Figure 2-13 Position of movable baffle plate
2. Insert the key into the keyhole, and rotate the key clockwise until a handle pops out.
3. Turn the handle 120
counterclockwise, as shown in Figure 2-14. And then pull the handle out until the door is
open.
120°
120
Figure 2-14 Rotating the handle
4. After the door is open, the door stay bar will restrain the door manually. You can adjust the angle twice, first time
90
and the second time 110
. The door stay bar is shown in Figure 2-15.
Door stay bar
Figure 2-15 Position of door stay bar
5. Before closing the door, manually restore the door stay bar to its original position, and then close the door and put
the handle to the original place.
6. Rotate the movable baffle plate upward and cover it over the keyhole after the cabinet door is closed, as shown in
