Vertilon SIB71256, Руководство пользователя

Страница: 8 / 16

SIB17256 Sensor Interface Board for Hamamatsu H13700 MAPMT
- 8 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886
/
Tel: (978) 692-7070 www.vertilon.com
Product Overview
The SIB71256 multianode photomultiplier tube interface board provides the mechanical and electrical connectivity
between the Hamamatsu H13700 256 anode PMT and external signal processing electronics such as Vertilon’s PhotoniQ
multichannel data acquisition systems. The MAPMT is mounted to the bottom side of the SIB71256 through a pair of
socket connectors that route the PMT’s 256 anode signals and last dynode output to the board. The high voltage bias to
the PMT is supplied separately on its own cable and thus never reaches the SIB71256. The anode signals are routed to
an on-board resistive anger logic circuit that generates four anger signal outputs. Each output is fed to an inverting
amplifier and made available to the user on an SMB connector. Event position and energy information can be determined
by connecting the four anger signal outputs to customer-supplied electronics. For timing applications utilizing the last
dynode output of the PMT, the SIB71256 includes a high speed non-inverting preamplifier whose output is also available
on an SMB connector. The polarity of the preamplifiers is such that the four anger and last dynode outputs produce all
positive going signals.
The various functions on the SIB71256 are described in greater detail on the following pages. When necessary, refer to
the functional block diagram shown in Figure 1 below.
Included

SIB71256 anger logic sensor interface board for Hamamatsu H13700 MAPMT

Wall mount +12V power supply with international plug set

Five 120 cm SMB to BNC coaxial cables

Gain adjustment tool

User Manual

Mounting board for 256 channel Hamamatsu H13700 MAPMT

Includes anger logic for interface to data acquisition systems

Reduces channel count from 256 down to 4 outputs

High speed preamplifier for each anger logic output

High speed preamplifier for last dynode output

Two user-selectable gain settings