Vertical WAVE IP 2500, Справочник по аппаратуре

Страница: 95 / 210

Physical description 12
-
5
Chapter 12: Integrated Services Card 1 (Wave IP 2500 only)
Wave Server Hardware Reference Guide
Shutdown button
The Shutdown button is located on the right side of the ISC1, to the left of the reset button, as
shown in Figure 12-2.
The Shutdown button provides a way to perform an orderly shutdown of Microsoft Windows
Server 2003 before turning off the power supply. The Shutdown button has a red cap.
The Shutdown button needs to be pressed down and held for four seconds before the shutdown
process starts. Once the shutdown begins, the third status LED will flash alternately red and
green.
Figure 12-2
ISC1 buttons
Reset button
The Reset button provides a way to restart the entire system without turning the power supplies
off and on. It is used when the Microsoft Windows Server 2003 operating system cannot be shut
down by using the Shutdown button. The Reset button is recessed and must be activated with a
pen tip or other small tool.
Caution:
Always attempt to shut the system down using the Shutdown button before using the
Reset button. Using the Reset button can lead to data loss since it bypasses the orderly shutdown
of the Microsoft Windows Server 2003 operating system.
The Reset button is located on the right side of the ISC1, right of the Shutdown button.
Shutdown button
Reset button
(recessed)
Release 2.0 Service Pack 1 April 2011