Vertical WAVE IP 2500, Справочник по аппаратуре

Страница: 175 / 210

Public Address systems B
-
3
Appendix B: Connecting Audio Devices
Wave Server Hardware Reference Guide
3. From a telephone on the Wave system, call another party.
You will need two people at two different extensions for this procedure.
4. When the party answers, press the button labeled Hold, Flash, or Link (on an analog
phone), or press the flash hook (flash hook only works on an analog phone), as shown in
Figure B-1.
The party placed on hold hears the music or message played by the music-on-hold
device.
Note (for analog phones users only): Callers placed on hold by using the Flash or
Link button, or by pressing the telephone flash hook will hear music-on-hold. Callers
placed on hold using the button labeled Hold on the telephone will hear nothing.
Figure B-1
Locating the flash hook
Public Address systems
Public Address (PA) systems allow Wave users to make public announcements over a loud
speaker, or to page a specific individual on a telephone speaker. A public address system
consists of a line out that connects to a PA system that allows you to select the volume of the
announcement. The device connects to the Wave system through the output audio connector.
Paging can be restricted to certain Wave users, depending on how your PA system is configured.
To page a group of digital phones simultaneously, create a zone paging group according to the
instructions in Chapter 16 in the
Wave Global Administrator Guide .
00076
Flash hook
Release 2.0 Service Pack 1 April 2011