Vertical Comdial DX-80, Техническое руководство

Страница: 121 / 322

- 121 -
DX-80 Programming Manual
P
ROGRAMMING
CO L
INES
> S
ETTING
C
ALL
A
BANDON
11. When you have finished all programming changes, perform a Send operation to copy your new database to
the DX-80 switch system memory. For more details, see Section 2.1.4.4, F4 – Send .
5.7 Setting Call Abandon
CO line supervision is a Central Office (telephone company) feature. This feature provides advanced handling of
call connections when the distant-end party disconnects. This function is especially useful when calls that have
been placed on hold go unattended and the caller hangs up, or when the caller is connected to voice mail, leaves a
message, and hangs up. The DX-80 receives the disconnect signal from the telephone company and forces the CO
line on-hook to release the system resource for other uses.
5.7.1 PROGRAMMING USING THE DET
Note: chg , bksp , save , one , always , del , and ack are interactive LCD button operations. Use the three buttons
below the LCD display to actuate the associated operation.
1. Enter Database Administration using the feature code Feature # * and then enter the DB Admin password.
2. Press show . The DB Item Select screen displays.
3. Enter 02-ccc-09 to program “ccc” CO Line – Call Abandon, where “ccc” = the CO line directory number
[740-755].
4. Press save . This advances you to the selected CO line call abandon setting for CO line “ccc.”
5. Press chg until the appropriate value (Y/N) displays for this CO line.
6. Press the Volume button (up or down) to return to the DB Item Select screen and enter another CO line.
Or…
Press the Hold button to select another CO line you want to program.
7. Enter the CO line number then press show .
8. Press next to advance through database items until the Call Abandon database item displays.
9. When finished programming CO line call abandon, press the Volume button (up or down) to return to the
DB Item Select screen.
Or…
Use back or next to skip to the appropriate database item.
10. When finished programming call abandon database items, press the Volume button (up or down) to return to
the DB Item Select screen or exit programming.
5.7.2 PROGRAMMING USING PC-DBA
1. Select Programming from the PC-DBA menu and press Enter . The system displays the Database Program-
ming menu.
2. Use the arrow keys to highlight CO Line and press Enter . The system displays the CO Line menu.
3. Highlight Category 1 and press Enter . The system displays the CO Line — Category 1 screen.