Vertex Standard VXR-9000EV, Руководство по обслуживанию

Страница: 5 / 70

B-3
Item
Bin _ CH _ 0
Bin _ CH _ 1
Bin _ CH _ 2
Bin _ CH _ 3
Bin _ CH _ 4
Channel_ Down
Channel _ Up
Compander _ On
Compander _ Off
Compander _ Toggle
CTCSS/DCS_Enc_ On
CTCSS/DCS_ Enc _Off
CTCSS/DCS_ Enc_ Toggle
CTCSS/DCS_ Dec_ On
CTCSS/DCS_Dec_ Off
CTCSS/DCS_ Dec_ Toggle
Two _ Tone _ Dec _ On
Two _ Tone _ Dec_ Off
Two _ Tone _ Dec _ Toggle
CW_ ID _ On
CW_ ID _ Off
CW_ ID _ Toggle
CW_ ID _ Single
CW_ Message _1
CW_ Message _2
CW_ Message _3
CW_ Message _4
CW_ Message _5
CW_ Message _6
CW_ Message _7
CW_ Message _8
CW_ Message _ Bin _ 0
CW_ Message _ Bin _ 1
CW_ Message _ Bin _ 2
CW_ Message _ Bin_ Trig
DC _ Power _ Save _On
DC _ Power _ Save _ Off
DC_ Power _ Save _ Toggle
Encryption _ On
Encryption _ Off
Encryption _ Toggle
Encryption _ Code
Local _ PTT _ On
Local _ PTT _ Off
Local _ PTT _ Toggle
Function
Recall the Memory Channel (Binary LSB)
Recall the Memory Channel (Binary)
Recall the Memory Channel (Binary)
Recall the Memory Channel (Binary)
Recall the Memory Channel (Binary MSB)
Step to the next-lower Operating Channel
Step to the next-higher Operating Channel
Turn the Compander Circuit "On"
Turn the Compander Circuit "Off"
Turn the Compander Circuit "On" or "Off" (Toggle)
Turn the CTCSS/DCS Encoder "On"
Turn the CTCSS/DCS Encoder "Off"
Turn the CTCSS/DCS Encoder "On" or "Off" (Toggle)
Turn the CTCSS/DCS Decoder "On"
Turn the CTCSS/DCS Decoder "Off"
Turn the CTCSS/DCS Decoder "On" or "Off" (Toggle)
Turn the 2-Tone Decoder "On"
Turn the 2-Tone Decoder "Off"
Turn the 2-Tone Decoder "On" or "Off" (Toggle)
Turn the CW IDer "On"
Turn the CW IDer "Off"
Turn the CW IDer "On" or "Off" (Toggle)
Transmit the CW ID
Send the CW Message 1
Send the CW Message 2
Send the CW Message 3
Send the CW Message 4
Send the CW Message 5
Send the CW Message 6
Send the CW Message 7
Send the CW Message 8
CW Message Recall (Binary LSB)
CW Message Recall (Binary)
CW Message Recall (Binary MSB)
Send the CW Message which is recalled from I/O port
Turn the DC Power Save Feature "On"
Turn the DC Power Save Feature "Off"
Turn the DC Power Save Featuer "On" or "Off" (Toggle)
Turn the Encryption Circuit "On"
Turn the Encryption Circuit "Off"
Turn the Encryption Circuit "On" or "Off" (Toggle)
Select the Encryption Code
Enable the Local PTT Switch
Disable the Local PTT Switch
Enable/Disable the Local PTT Switch (Toggle)
P
ROGRAMMABLE
I/O P
ORT
I
NPUT
I
TEMS
Item
Monitor _ On
Monitor _ Off
Monitor _ Toggle
Monitor _M
Multi _ Tone _ Main
Multi _ Tone _ Sub
Multi _ Tone _ Toggle
Panel_ Indicator _ On
Panel_ Indicator _ Off
Panel_ Indicator _ Toggle
Repeat _ On
Repeat _ Off
Repeat_ Toggle
Reset
Scan _ On
Scan _ Off
Scan _ Toggle
Squelch _ On
Squelch _ Off
Squelch _ Toggle
Test _ Tone _ On
Test _ Tone _ Off
Test _ Tone _ Toggle
Test _ Tone _ M
TOT _ On
TOT_ Off
TOT _ Toggle
Transmit_ On
Transmit _ Off
Transmit _ Toggle
TX_ Power _ Mid _ On
TX_ Power _ Mid _ Off
TX_ Power _Mid _ Toggle
TX_ Power _Low_ On
TX_ Power _Low_ Off
TX_ Power _ Low _ Toggle
Function
Turn the Monitor Function "On"
Turn the Monitor Function "Off"
Turn the Monitor Function "On" or "Off" (Toggle)
Turn the Monitor Function "On" when the I/O port is
"High"
Select the Tone Table to "Main"
Select the Tone Table to "Sub"
Switch the Tone Table between "Main" and "Sub"
(Toggle)
Turn the Front Panel's Illumination "On"
Turn the Front Panel's Illumination Off
Turn the Front Panel's Illumination "On" or "Off" (Toggle)
Set theOperating Mode to "Repeat" mode
Set theOperating Mode to "Base" mode
Toggle theOperating Mode between the "Repeat"
mode and "Base" mode
Reset the Repeater
Start Scanning
Stop Scanning
Toggle the Scanner between "Start" and "Stop"
Turn the Squelch Circuit "On (Close)"
Turn the Squelch Circuit "Off (Close)"
Turn the Squelch Circuit "On" or "Off" (Toggle)
Generate the Test Tone Signal
Stop the generation of the Test Tone
Toggle the Test Tone genetation "On" and "Off"
Generate the Test Tone Signal when the I/O port is
"High"
Turn the Time-Out Timer featuer "On"
Turn the Time-Out Timer featuer "Off"
Turn the Time-Out Timer featuer "On" or "Off"
Enable the transmission of the Repeater
Disable the transmission of the Repeater
Enable/Disable the transmission of the Repeater
Set the transmitter power to the "Mid" level
Return the transmitter power to "Original" power level
Toggle the transmitter power between the "Mid" level
and "Original" power level
Set the transmitter power to the "Low" level
Return the transmitter power to "Original" power level
Toggle the transmitter power between the "Low" level
and "Original" power level
P
ROGRAMMABLE
I/O P
ORT
O
UTPUT
I
TEMS
DSUB 25-pin Accessory Connector
Item
Remote _ Enb
Busy
CTCSS _ Correspond
DCS _Correspond
CTCSS/DCS_ Correspond
RX_ Unlock
TX_ Unlock
PLL _ Unlock
Function
Output the signal when the Operating mode is set to
"Repeat" mode.
Output the signal when the squelch is opened.
Output the signal when the receiving CTCSS tone is
matched.
Output the signal when the receiving DCS code is
matched.
Output the signal when the receiving CTCSS tone or
DCS code is matched.
Output the signal when the RX PLL Circuit is Unlocked.
Output the signal when the TX PLL Circuit is Unlocked.
Output the signal when the TX or RX PLL Circuit is
Unlocked.
Item
Power _ Supply_ Backup
Power _ Supply_ Voltage
Transmit
Fan _ Alarm
Fan _Status
High_ Temperature
TX_ PD_ Det
Anser _ Back
Function
Output the signal when the backup power source is
used.
Output the signal when the main power source is used.
Output the signal when the repeater is transmitting.
Output the signal when the Coolig Fan is disabled.
Output the signal when the Coolig Fan is activated.
Output the signal when the PA Unit is High Tempera-
ture.
Output the signal when the TX power is abnormalily.
Output the signal when the repeater status is changed
from the Remote Control command.