Vertex Standard VXR-1000, Руководство по обслуживанию

Страница: 7 / 54

7
This document outlines the interconnections and hardware settings required for interface of the Ver-
tex VXR-1000 Compact Mobile Repeater to the Vertex VX- series of mobile transceivers.
1. Interconnections to Mobile Transceivers
The chart below shows the interconnections between J1004 on the VXR-1000 and the correspond-
ing interface jacks on the compatible mobile transceivers.
Note 1: The Mobile COR Detect line may be
connected, inside the mobile trans-
ceiver, to either pointshown (e.g. for
the VX-2000, either to Pin 1 of J1003
(SQ) or to the Base of Q1008 )AF
M
UTE
). See Section 6 of this document
for information regarding the Mobile
COR Detect connection in the VX-
3000.
Note 2: When the mobile transceiver is not
used in a trunking environment, the
“Mobile TX Detect” function is not
used.
VXR-1000 DSUP 9-pin Accessory Connector FTL-7011 VX-2000 VX-3000
Pin 1 GND Pin 8 of J2006 GND Pin 5 of J1003 GND Pin 5 of J1004 GND
Pin 2 Mobile Transmit Audio Pin 4 of J2006 MIC IN Pin 3 of J1003 MOD IN Pin 3 of J1004 EXM
Pin 3 Power Supply Control Pin 12 of J2006 13.8V SWED Pin 8 of J1003 +5V Pin 8 of J1004 13 SWD
Pin 4 Mobile PTT Output Pin 1 of J2006 PTT Pin 7 of J1003 PTT Pin 7 of J1004 PTT
Pin 5 Vcc (13.8 V) Pin 9 of J2006 13.8V TP1003 13.8V 13.8 V IN 13.8V
Pin 6 Mobile Receive Audio Pin 3 of J2001 DET IN Pin 2 of J1003 DISC OUT Pin 2 of J1004 LINE
Pin 7 Mobile COR Detect (Note 1)
Pin 1 of J2001
(or Base of Q2005)
SQ SIG
(AF MUTE)
Pin 1 of J1003
(or Base of Q1008)
SQ
(AF MUTE)
Pin 1 of J1004 SQ
Pin 8 Mobile Microphone Audio No Connection
−
No Connection
−
No Connection
−
Pin 9 Mobile TX detect/Mobile Mic. PTT (Note 2) Pin 5 of J2005 RX/TX TP1013 TX 9V No Connection
−
Shield GND GND
−
GND
−
GND
−
Interconnection with Vertex VX- Series Transceivers