Vertex Standard VXD-7200, Руководство по эксплуатации

Страница: 46 / 84

44
n Scan
When you start a scan, your radio cycles through
the programmed scan list for the current channel
looking for voice activity.
The yellow LED blinks and you see the scan icon
on the display.
During a dual mode scan, if you are on a digital
channel, and your radio locks onto an analog chan-
nel, it automatically switches from digital mode to
analog mode for the duration of the call. This is
also true for the reverse.
There are two ways of initiating scan:
• Main Channel Scan
(
Manual
): Your radio
scans all the channels/groups in your scan list.
On entering scan, your radio may – depending
on the settings – automatically start on the last
scanned “active” channel/group or on the chan -
nel where scan was initiated.
• Auto Scan
(
Automatic
): Your radio automati-
cally starts scanning when you select a channel/
group that has Auto Scan enabled.
1
Starting and Stopping Scan
Procedure :
Press the programmed Scan button to start or stop
Scan.
OR
Follow the procedure below.
1 Use the Channel Rocker to select a channel
programmed with a scan list.
2
MENU
to access the menu.
3 or to “
Scan
” and press
ENTER
to select.
4 The display shows “
Turn On
” if scan is disabled.
OR
The display shows “
Turn Off
” if scan is enabled.
5
Press
ENTER
to select.
6
The yellow LED blinks and the scan icon is dis-
played when Scan is enabled.
OR
The LED turns off and the scan icon is not dis-
played when Scan is disabled.
While scanning, the radio will only accept data (e.g.
text message) if received on its Selected Channel.
a
DV
ance
D
f
ea
tures