VX-925E O
PERATING
M
ANUAL
E
NGLISH
A
TTENTION
IN
C
ASE
OF
U
SE
This transceiver works on frequencies which are not generally permitted. For
frequency allocation, apply for a license at your local spectrum management
authority. For actual usage contact your dealer or sales shop in order to get your
transceiver adjusted to the allocated frequency range.
L
IST
OF
THE
PRACTICABLE
AREA
AUT
BEL
BGR
CYP
CZE
DEU
DNK
ESP
EST
FIN
FRA
GBR GRC HUN
IRL
ITA
LTU
LUX
LVA
MLT
NLD
POL
PRT
ROU
SVK
SVN SWE CHE
ISL
LIE
NOR
C
ONTROL
& S
WITCHES
Microphone
Speaker
MIC/SP Jack
VOL/PWR Knob
CH (Channel) Selector
Battery Pack Latch
Programmable Key
Programmable Key
Push To Talk (PTT) Switch
Antenna Jack
Tone 2 Key
LCD (LCD Version)
Tone 1 Key
MONITOR Key
TOGGLE Switch
LED Indicator
Glows Green
Transmitting
Blinking Red
Busy Channel
B
AISIC
O
PERATION
r
Turn the top panel’s
VOL/PWR
knob clockwise to turn on the radio.
r
Turn the top panel’s
CH
selector knob to choose the desired operating
channel.
r
Rotate the
VOL/PWR
knob to set the desired audio level.
If no signal is present, press and hold in the
MONITOR
key; background noise
will now be heard, and you may use this to set the
VOL/PWR
knob for the
desired audio level. Press and hold in the
MONITOR
key to quiet the noise and
resume normal (Quiet) monitoring.
r
To transmit, press and hold in the
PTT
switch. Speak into the microphone area
of the front panel grille in a normal voice level. To return to the Receive mode,
release the
PTT
switch.
r
Press (or press and hold in) the
Programmable
key (or switch the
TOGGLE
switch) to activate the function which is corresponding with that key or switch.
r
Turn the top panel’s
VOL/PWR
knob fully counter clockwise to turn off the
radio.
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
VERTEX STANDARD
(
AUSTRALIA
)
PTY.,
LTD.
Normanby Business Park, Unit 14/45 Normanby Road
Notting Hill 3168, Victoria, Australia
Copyright 2009
VERTEX STANDARD CO., LTD.
All rights reserved.
No portion of this manual
may be reproduced
without the permission of
VERTEX STANDARD CO., LTD.
Notification of intended purpose of product use:
This product is suitable for
use in private mobile radio (PMR) systems. It utilises operating frequencies not
harmonised in intended country of use.
Declaration of Conformity:
Vertex Standard Declares this
product complies with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Note:
A copy of signed and dated Declaration of Conformity can be obtained via
your local Vertex Standard Sales representatives.
For a copy of the complete Owners Manual go to http://www.vertexstandard.com/
manuals
F
OR
H
AND
H
ELD
T
RANSCEIVERR
r
Please read this manual carefully to become familiar with the features of this
transceiver.
r
Do not transmit the radio without an antenna connected.
r
When transmitting, hold the radio in a vertical position with its microphone 2.5
to 5 cm away from your mouth and keep the antenna at least 2.5cm away from
your head.
r
The radio must be used with a maximum operating duty cycle not exceeding
50 %, in typical Push-to-Talk (PTT) configurations. DO NOT transmit for more
than 50 % of total radio use time (50 % duty cycle). Transmitting more than
50 % of the time can cause RF exposure compliance requirements to be
exceeded.
The radio is transmitting when the red LED on the top of the radio is illuminated.
You can cause the radio to transmit by pressing the PTT button or by using the
VOX headset, if the radio is supported.
r
Always use the Vertex Standard authorized Battery Pack.
r
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
r
Perform the battery charging where the ambient temperature range 0 °C to
+45 °C. Charge out of this range could cause damage to the battery pack.
r
Battery Pack shall not be exposed to excessive heat such as sunshine, fire or
the like.
r
Always use Vertex Standard authorized accessories.
Vertex Standard shall not be liable for any damage or accidents such as fire,
leakage or explosion of batteries, etc., caused by the malfunction of non-
Vertex Standard accessories.
r
This radio generates RF electromagnetic energy during transmit mode.
This radio is designed for and classified as occupational use only, meaning
it must be used only during the course of employment by individuals aware
of hazardous, and the ways to minimize such hazardous. This radio is not
intended for use by the General Population in an uncontrolled environment.
F
OR
M
OBILE
T
RANSCEIVER
WARNING:
DO NOT operate the radio when any person(s) (bystanders) outside
the vehicle are within the distances shown in the chart at the bottom of this
section.
Safety Training information:
Antennas used for this transmitter must not exceed
an antenna gain of 0 dBd. The radio must be used in vehicle-mount configurations
with a maximum operating duty factor not exceeding 50 %, in typical Push-to-Talk
configurations.
This radio is restricted to occupational use, work related operations only where
the radio operator must have the knowledge to control the exposure conditions of
its passengers and bystanders by maintaining the minimum separation distance
shown below.
Antenna Installation:
For rear deck trunk installation, the antenna must be
located at least 1 m (VHF model) or 0.8 m (UHF model) away from rear-seat
passengers. For roof top installations, the antenna must be placed in the center
of the roof.
Warning!:
The HIGH voltage is applied to the antenna terminal of the
transceiver while transmitting.
Do not touch the TX RF section absolutely while transmitting.
Caution:
The radio can become hot.
Do not operate the radio continuously in transmission mode for longer than
7 minutes. Ensure enough standby/reception time for cool-down between
transmission periods. Be sure that TOT timer is correctly installed and
properly working. Avoid touching the rear bottom of the transceiver’s body
while transmission.
Automotive Directive E-Marking:
In order to meet the requirements of the
Automotive Directive (72/245/ECC, as amended by 95/54EC) this product must
be installed in a vehicle in accordance with the vehicle manufacturers guide lines
and the installation u\instructions detailed in the product Installation Manual.
C
OMMON
I
NFORMATION
D
ISPOSAL
OF
YOUR
E
LECTRONIC
& E
LECTRIC
E
QUIPMENT
Products with the symbol (crossed-out wheeled bin) cannot
be disposed as household waste. Electronic and Electric Equipment
should be recycled at a facility capable of handling these items and
their waste byproducts. In EU countries, please contact your local
equipment supplier representative or service center for information
about the waste collection system in your country.
VX-925E̲100219.indd 2
VX-925E̲100219.indd 2
10.2.19 4:40:08 PM
10.2.19 4:40:08 PM
E C 0 7 5 N 1 6 0