VX-800 O
PERATING
M
ANUAL
5
O
PERATION
r
Press the top panel’s
SEL1/SEL2
key to
activate one of the
preprogrammed func-
tions which may have
been enabled at the
time of programming
by the dealer. Similarly, when using the 16-key
version, the [
A
], [
B
], [
C
], and [
D
] function keys
activate one of these functions, if programmed
by the dealer. See the next section for details re-
garding the available features.
r
Switch the top panel’s
Toggle
Switch to the
[
A
], [
B
] or [Center]
position to activate
one of the pre-pro-
grammed functions
which may have been
enabled at the time of programming by the dealer.
When this switch is in the [
A
(left)], [
B
(right)]
or [Center] position, the feature programmed (by
your dealer) to that switch position will be acti-
vated. See the next section for details regarding
the available features.
r
Press the
DTMF
keys on the telephone keypad
while pressing the
PTT
switch to send DTMF
tones (16-key version only).
r
If a Speaker/Microphone is available, remove the
plastic cap and its two mounting screws from the
right side of the transceiver, then align the con-
nector of the Speaker/Microphone on the trans-
ceiver body; secure the connector pin using the
screws supplied with the Speaker/Microphone.
Hold the speaker grille up next to your ear while
receiving. To transmit, press the
PTT
switch on
the Speaker/Microphone, just as you would on
the main transceiver’s body, and speak into the
microphone on a normal voice level.
Note: Save the original plastic cap and its mount-
ing screws. They should be reinstalled when
not using the Speaker/Microphone.